Cost guide
Foundation Repair Cost in 2026: Prices by Problem, Method and Pier Type
Most published averages land near $5,000, but a pier job is priced by the pier and then multiplied. Find your repair below, count what it needs, and add the costs that sit outside the contractor's number.

Most foundation repairs cost $2,225 to $8,133, with an average of $5,174, according to Angi data published by HomeAdvisor in June 2026. Crack repairs run a few hundred dollars. Settlement repairs are priced per pier, about $1,000 to $3,000 each, and most slab jobs need 5 to 15 piers (Olshan), so pier jobs often reach five figures.
Published 2026 benchmarks
$5,174
National average; typical range $2,225–$8,133
$1,000–$3,000 per pier
Piering or underpinning
5–15 piers
What most slab jobs require
$11,950
Average reported by a structural repair contractor
These are national figures from publishers and contractors with different mixes of jobs, so none of them is a quote for your house. For a planning range based on your home’s size, foundation and symptoms, use the foundation repair cost calculator. Then get itemized written quotes, because only an on-site assessment sets the scope.
What Most Homeowners Pay, and Why the Averages Disagree
Most homeowners pay a few thousand dollars. Published averages still range from about $3,850 to almost $12,000, because each source averages a different mix of jobs. A dataset full of crack repairs averages low. A contractor that mostly installs piers averages high.
| Source | Typical range | Range on a shared scale |
|---|---|---|
| Thumbtack (marketplace data)Average and date: Avg $3,843; July 2026 | $2,035–$7,329 | |
| Bob VilaAverage and date: Avg $5,001; May 2024 | $2,176–$7,833 | |
| HomeAdvisor (Angi data)Average and date: Avg $5,174; June 2026 | $2,225–$8,133 | |
| This Old House (Angi data)Average and date: Avg $5,179; Oct 2026 | $2,224–$8,134 | |
| LendEDU (via Angi)Average and date: Avg about $5,200; April 2026 | $2,200–$8,150 | |
| Olshan (contractor)Average and date: Avg $11,950; June 2026; high end '$34,000+' | $8,641–$34,000 |
Sources: Thumbtack, Bob Vila, HomeAdvisor, This Old House, LendEDU, Olshan.
Three of the six publish the same Angi dataset, so their near-identical numbers aren’t independent confirmation. This Old House says its figures cover homes of 1,000 to 2,000 square feet. The disagreement is mostly about which jobs are counted.
- Crack repairs pull averages down. HomeAdvisor prices crack repair at $250 to $800, and those jobs sit inside the same dataset as pier jobs.
- Contractor data skews toward structural work. Olshan’s own tables start crack sealing at $750 and price most of its work by the pier or by the project, so its $11,950 average describes a heavier job mix.
- Severity tiers tell the same story. Perma-Pier, a Texas contractor, puts minor repairs at $500 to $3,000, moderate at $3,000 to $10,000, and major repairs at $10,000 to $15,000 or more. Ram Jack gives an overall span of about $300 to $30,000 or more.
The practical answer: ignore the national average once you know what kind of repair you need, and price the repair itself.
Cost by the Problem You’re Seeing
The symptom points to a likely repair, and the repair sets the price scale. A leaking wall crack is a job measured in hundreds of dollars. A settling corner is measured in piers.
| What you see | Usual repair | Published price | More detail |
|---|---|---|---|
| Hairline or small, stable cracks | Crack sealing or injection | $250–$800 (HomeAdvisor); $300–$800 (Ram Jack); $750–$3,500 per project for slab crack sealing (Olshan) | Foundation crack repair cost |
| Leaking basement wall crack | Epoxy or urethane injection | $750–$4,500 per project (Olshan) | Foundation crack repair cost |
| Sloping floors, sticking doors, stair-step cracks (slab) | Underpinning with piers | $1,000–$3,000 per pier (HomeAdvisor) × the pier count | Slab foundation repair cost |
| A sunken section of slab | Mudjacking or polyurethane foam | $500–$1,300 mudjacking (HomeAdvisor); $4,500–$11,500 foam per project (Olshan) | House leveling cost |
| Bowing or leaning basement wall | Wall anchors, straps or tiebacks | $400–$700 per anchor; $350–$1,000 per strap; $1,500–$1,800 per tieback (Angi) | See wall stabilization below |
| Sagging or bouncy floors over a crawl space | Re-shimming, new piers, framing repair | $800–$3,500 re-shim job; $1,100–$1,700 per replaced pier (Olshan) | Pier and beam repair cost |
| Water pooling against the foundation | Drainage correction and regrading | $2,800–$8,000 (Olshan); $2,800–$6,500 for a drainage system (LendEDU) | See drainage below |
| Widespread movement or a failed foundation | Whole-house lift or replacement | $20,000–$23,000 lifting (This Old House); $20,000–$100,000 replacement (Bob Vila, 2024) | Get a structural engineer involved first |
Not sure which row you’re in? Start with the signs of foundation problems or the guide to foundation crack types before you price anything.
Safety first
Rapidly widening cracks, a wall that is bulging or leaning, doors that suddenly won’t close, a visibly sagging beam, or a gas smell need prompt help. Call the gas utility for a gas smell, and get a structural engineer or experienced contractor out quickly for the rest. Don’t wait to collect three quotes.
Cost per Pier by Pier Type
Published prices run from under $1,000 to about $4,400 per pier, and the pier type explains most of the spread. In Olshan’s list, a helical pier costs roughly three times a steel push pier.
| Pier type and source | Per pier | Range on a shared scale |
|---|---|---|
| Drilled pier (Olshan)Date: June 2026 | $765–$1,100 | |
| Hydraulic pier (Bob Vila)Date: May 2024; 'depending on the type' | $700–$2,100 | |
| Steel push pier (Olshan)Date: June 2026 | $990–$1,350 | |
| Concrete pier (Perma-Pier)Date: April 2026 | $1,000–$3,000 | |
| Piering or underpinning, any type (HomeAdvisor)Date: June 2026 | $1,000–$3,000 | |
| Steel pressed piling (Ram Jack)Date: Aug 2026 | $1,500–$3,000 | |
| Steel pier (Perma-Pier)Date: April 2026 | $1,500–$4,000 | |
| Helical pier (Ram Jack)Date: Aug 2026 | $2,000–$4,000 | |
| Helical pier (Olshan)Date: June 2026 | $3,500–$4,400 |
Sources: Olshan, Bob Vila, Perma-Pier, HomeAdvisor, Ram Jack. Perma-Pier says helical piers fall in a similar range to its steel piers.
Engineer estimating rates are not retail prices
A San Antonio and Austin engineering firm, A-1 Engineering, uses much lower per-pile rates for preliminary Texas estimates: $350 for concrete pressed piles, $550 for steel pressed piles, $700 for helical steel piles and $950 for cast-in-place concrete piers. The firm says its numbers “vary across the state and by project.” Treat them as an engineer’s planning rates for one market, not as per-pier quotes to hold a contractor to.
How each pier type works, and where it fits, is covered in the guides to push piers, helical piers, concrete piers and pressed concrete pilings. A dedicated foundation repair cost per pier guide goes deeper on depth, spacing and capacity.
How many piers a job needs
Most slab jobs need 5 to 15 piers. Olshan’s published counts are 4 to 6 for a small settled corner, 5 to 15 for a typical slab job, and 12 to 20 or more for widespread settlement along a full side. LendEDU says an average home needs 8 to 10, for $8,000 to $30,000 in total. The engineer or contractor sets the real count from the floor elevations and the extent of movement.
Pier count times price
The per-pier price only becomes a budget once it’s multiplied. Here is what Olshan’s counts look like at Olshan’s own prices.
| Scope | Pier count | Steel push piers at $990–$1,350 | Helical piers at $3,500–$4,400 |
|---|---|---|---|
| Small settled corner | 4–6 | 4 × $990 = $3,960 to 6 × $1,350 = $8,100 | 4 × $3,500 = $14,000 to 6 × $4,400 = $26,400 |
| Typical slab job | 5–15 | 5 × $990 = $4,950 to 15 × $1,350 = $20,250 | 5 × $3,500 = $17,500 to 15 × $4,400 = $66,000 |
| Full side, widespread settlement | 12–20+ | 12 × $990 = $11,880 to 20 × $1,350 = $27,000 | 12 × $3,500 = $42,000 to 20 × $4,400 = $88,000 |
The same house can carry a five-figure difference depending on pier type alone. That’s why a bid that gives only a total can’t be compared with anything: ask for the pier count, the pier type and the per-pier price as separate lines.
Know roughly which repair you need? Get a planning range for your house before you call contractors.
Other Repair Methods and Their Prices
Repairs that don’t use piers are usually priced per project, or per anchor, strap or foot. Published figures for the same method can differ by several times, so check the scope as well as the number.
Crack injection and sealing
Sealing or injecting a crack is the least expensive structural-looking repair, though the published figures disagree about how cheap it is.
| Job and source | Published price | Range on a shared scale |
|---|---|---|
| Crack repair (HomeAdvisor)Unit and date: Unit not stated; June 2026 | $250–$800 | |
| Crack repair (Ram Jack)Unit and date: Unit not stated; Aug 2026 | $300–$800 | |
| Hairline crack sealing, slab (Olshan)Unit and date: Per project; June 2026 | $750–$3,500 | |
| Basement wall crack injection (Olshan)Unit and date: Per project; June 2026 | $750–$4,500 |
The lower figures likely describe a single crack; Olshan prices the whole project. Epoxy versus polyurethane, per-foot pricing and DIY kits are covered in the foundation crack repair cost guide.
Slab lifting: mudjacking and foam
Mudjacking and polyurethane foam raise a sunken slab by filling the void under it, without piers. Published prices for the same job conflict sharply.
| Job and source | Published price | Range on a shared scale |
|---|---|---|
| Mudjacking or slabjacking (HomeAdvisor)Date: June 2026 | $500–$1,300 | |
| Mudjacking or slabjacking (This Old House)Date: Oct 2026 | $550–$1,300 | |
| Polyurethane injection, residential (Ram Jack)Date: Aug 2026 | $1,000–$3,000 | |
| Polyurethane foam injection (Olshan)Date: June 2026, per project | $4,500–$11,500 | |
| Mudjacking or slabjacking (Olshan)Date: June 2026, per project | $5,000–$10,800 |
Olshan’s own page also lists mudjacking at $1,900 to $3,800 in a quick-reference summary, which conflicts with its $5,000 to $10,800 table figure. None of these sources states the slab area being lifted, and that is the likeliest reason the ranges differ. When you compare quotes, ask how many square feet will be lifted, how many injection holes are planned, and what lift target is promised. The polyjacking vs mudjacking comparison covers which one fits, and the house leveling cost guide compares lifting with and without piers.
Basement wall stabilization
Bowing basement walls are priced per anchor, strap or tieback. Angi’s October 2026 figures put each one between $350 and $1,800.
| Method | Per unit | Range on a shared scale |
|---|---|---|
| Carbon fiber or steel strapUnit: Each; $85–$250 per foot | $350–$1,000 | |
| Wall anchorUnit: Each; placed about every 5 ft | $400–$700 | |
| Helical tiebackUnit: Each | $1,500–$1,800 |
Source: Angi, updated Oct 1, 2026. For a 20-foot wall, Angi totals the options at $1,600 to $2,800 for wall anchors, $1,700 to $5,000 for straps, $6,000 to $7,200 for helical tiebacks, and $6,800 to $11,000 for straightening the wall, which it prices at $340 to $550 per foot including straps. Olshan prices whole projects higher: $6,000 to $13,000 for wall anchors or adjustable braces and $5,500 to $13,000 for carbon fiber straps, without stating a wall length. LendEDU puts carbon fiber at $100 to $250 per linear foot installed.
Which method suits which wall is covered in the guides to bowing foundation walls, wall anchors and carbon fiber reinforcement.
Pier-and-beam work
Crawl-space repairs are a stack of separate jobs: adjusting existing piers, replacing failed ones, and repairing the wood framing they carry. Olshan’s June 2026 figures:
| Job | Published price | Range on a shared scale |
|---|---|---|
| Shimming existing piersUnit: Job total | $800–$3,500 | |
| Single pier replacementUnit: Per pier | $1,100–$1,700 | |
| Support post installationUnit: Unit not stated | $1,300–$2,500 | |
| Beam or joist sisteringUnit: Job total | $1,500–$4,000 | |
| Multiple pier replacementUnit: Job total, pier count not stated | $6,600–$12,000 | |
| Full re-leveling, widespread settlementUnit: Job total | $9,000–$23,000 |
Source: Olshan. Angi puts pier and beam repair overall at $800 to $25,000, with a $10,000 national average. The line-by-line breakdown, including joists, beams, sill plates and a 20-year re-shimming cost model, is in the pier and beam repair cost guide.
Drainage and grading
A full drainage correction costs roughly $2,800 to $8,000, and it’s often what keeps a structural repair from failing again. Olshan lists drainage correction plus regrading at $2,800 to $8,000. LendEDU puts a full drainage system at $2,800 to $6,500, and says drainage work overall ranges from $800 to $15,000 depending on severity. Bob Vila’s 2024 figure for drainage system installation is the same $2,800 to $6,500. If the soil around your house keeps getting soaked, a pier repair without drainage correction is paying for the symptom.
Cost by Foundation Type
Foundation type changes which repairs are possible more than it changes the overall range. Published ranges by type overlap almost completely.
| Foundation type and source | Repair range | Range on a shared scale |
|---|---|---|
| Concrete slab (LendEDU)Date: April 2026 | $350–$20,000 | |
| Concrete slab, Austin (Angi)Date: Oct 2025 | $3,000–$8,500 | |
| Basement (LendEDU)Date: April 2026 | $2,300–$7,600 | |
| Basement, Austin (Angi)Date: Oct 2025 | $3,000–$15,000 | |
| Pier and beam (LendEDU)Date: April 2026 | $750–$25,000 | |
| Pier and beam (Angi)Date: Sept 2026; $10,000 average | $800–$25,000 | |
| Crawl space, Austin (Angi)Date: Oct 2025 | $2,000–$12,000 | |
| Cinder block and brick (LendEDU)Date: April 2026 | $350–$25,000 | |
| Brick or block, Austin (Angi)Date: Oct 2025 | $3,500–$10,000 |
Sources: LendEDU, Angi Austin, Angi pier and beam. Bob Vila’s 2024 figures are nearly identical to LendEDU’s, and Bob Vila ties its basement range to waterproofing, so treat the basement row as a waterproofing-heavy figure rather than a structural one.
What actually differs by type is the work:
- Slab: piers driven from outside or tunneled from inside, plus plumbing tests and interior break-outs. See the slab foundation repair cost guide.
- Pier and beam or crawl space: shims, replaced piers and wood framing, with access and moisture driving labor. See the pier and beam repair cost guide.
- Basement: wall anchors, straps, tiebacks and waterproofing, plus piers for settlement. A planned basement foundation repair cost guide will cover it in more depth.
Cost guides by repair
- Foundation Repair Cost CalculatorPrice piers, re-shimming, crack injection, wall straps and add-ons line by line from dated 2026 sources, then compare the range with your contractor's quote.
- Foundation Crack Repair CostFoundation crack repair costs $250 to $800 per crack in 2026. See per-foot and minimum charges, DIY kit prices, epoxy vs polyurethane, and structural fixes.
- Slab Foundation Repair Cost2026 slab foundation repair costs: per-pier prices by pier type, pier counts and totals for a corner, side or perimeter, foam lifting, and plumbing-test extras.
- Pier and Beam Foundation Repair CostPier and beam repair costs for 2026, by job: re-shimming, new piers, joists, beams and sill plates, plus a 20-year re-shim cost model and a quote checklist.
- House Leveling Cost2026 house leveling costs by job: re-shimming, slab pier-and-lift, whole-house lift. See how per-pier quotes add up and what drywall, doors and plumbing add.
- Helical Piers CostHelical piers cost about $2,000–$4,400 per pier installed in 2026 sources. Totals by pier count, a line-item sample quote, and how torque and depth set price.
The Costs That Aren’t in the Per-Pier Price
A contractor’s quote often covers only its own work. Engineering, permits, plumbing tests and restoration inside the house can add thousands more. A-1 Engineering, a Texas engineering firm, makes this point on its estimating page: a foundation company may quote only its portion, while the total project cost should include all the building repairs needed afterward.
| Item | Published cost | When you need it |
|---|---|---|
| Structural engineer report or inspection | $340–$780 (HomeAdvisor); $499–$780 residential (Olshan); $500–$1,000 (This Old House); $200–$400 (Thumbtack); Houston $400–$1,000, or $1,100+ for a fuller investigation (Angi) | Settlement, bowing walls, or bids that disagree about the cause |
| Soil (geotechnical) report | $500–$3,000 (This Old House) | When soil conditions have changed substantially or the engineer asks for one |
| Permit | $75–$150 (This Old House); $300 in A-1's Texas example; $300–$600 in Austin (Angi) | Most structural work, such as adding piers or cutting a slab |
| Plumbing leak test | $800 static test (A-1 Engineering); hydrostatic test from $1,650, isolation testing $295 per hour, Houston (Nick's Plumbing) | Whenever a slab is lifted or jacked |
| Plumbing repair after a lift | $3,000 with permit (A-1 Engineering) | If the test finds a leak |
| Interior break-outs for inside piers | Building sq ft × 0.0125 × $75 (A-1 Engineering); 2,000 sq ft = $1,875 (our calculation) | When piers go under the slab inside the house |
| Drywall crack repair | $3,500 (A-1 Engineering) | After most real lifts |
| Flooring repair | $4,000 (A-1 Engineering) | After interior break-outs or a lift that cracks tile |
| Landscaping after repair | $1,000 (A-1 Engineering) | When exterior piers are dug through beds or hardscape |
| Contingency for unseen obstacles | $1,000–$2,500 (This Old House) | Always; buried conditions change scope |
| Post-repair floor elevation survey | No reliable published price found | Texas Section ASCE guidelines call for one; ask whether it's included |
Two of these come from engineering guidance, not just good practice. The Texas Section ASCE guidelines say water supply and sanitary drain lines “should be tested for leaks if jacking or lifting is included” (section 7.6), and that repair documents should include “the requirement for performing a floor elevation survey after completion” (section 7.4.1). The same guidelines say the engineer “should personally visit the site” (section 3.1). A remote opinion is not an engineering evaluation.
Labor is the other hidden variable. HomeAdvisor says most foundation specialists charge about $200 an hour, though many quote by the job; Angi reports $75 to $150 an hour in Austin. Our planned hidden costs of foundation repair guide will go further.
Three Hypothetical Budgets, with the Arithmetic
These budgets show how line items add up to a total. The houses are invented, each figure comes from the published source named beside it, and mixing sources is a simplification. Your quotes will differ.
Budget 1: a settled corner on a slab, 5 steel push piers
| Line item | Arithmetic | Low | High | Source |
|---|---|---|---|---|
| Steel push piers | 5 × $990 to 5 × $1,350 | $4,950 | $6,750 | Olshan, June 2026 |
| Structural engineer report | One residential report | $499 | $780 | Olshan, June 2026 |
| Permit | One permit | $75 | $150 | This Old House, Oct 2026 |
| Plumbing leak test | TX engineer's static-test figure to a Houston plumber's starting price | $800 | $1,650 | A-1 Engineering; Nick's Plumbing |
| Contingency | Reserve for unseen obstacles | $1,000 | $2,500 | This Old House, Oct 2026 |
| Total | Sum of the rows | $7,324 | $11,830 | Our calculation |
Swap the steel push piers for helical piers at Olshan’s $3,500 to $4,400 and the piers alone become 5 × $3,500 = $17,500 to 5 × $4,400 = $22,000. The budget above also leaves out drywall and door touch-ups, which the house leveling cost guide prices separately.
Budget 2: a whole-house estimate for a 2,000 sq ft slab
A-1 Engineering publishes a preliminary formula for whole-house pressed-pile repairs: piles = building square footage × 0.025. For a 2,000 sq ft house, that’s 2,000 × 0.025 = 50 piles. The line items below are A-1’s, using its lowest-cost option (concrete pressed piles at $350).
| Line item | Arithmetic | Cost |
|---|---|---|
| Concrete pressed piles | 50 × $350 | $17,500 |
| Interior break-out | 2,000 × 0.0125 × $75 | $1,875 |
| Leveling or lift | Flat figure | $2,000 |
| Engineering inspection | Flat figure | $600 |
| Permit | Flat figure | $300 |
| Foundation subtotal | $17,500 + $1,875 + $2,000 + $600 + $300 | $22,275 |
| Plumbing static test | Flat figure | $800 |
| Plumbing repair, with permit | Flat figure | $3,000 |
| Sheetrock crack repair | Flat figure | $3,500 |
| Flooring repair | Flat figure | $4,000 |
| Landscaping | Flat figure | $1,000 |
| Plumbing and restoration subtotal | $800 + $3,000 + $3,500 + $4,000 + $1,000 | $12,300 |
| Total | $22,275 + $12,300 | $34,575 |
The plumbing and restoration lines are about a third of the total ($12,300 ÷ $34,575 ≈ 36%), and none of them would appear in a foundation contractor’s per-pier quote. At A-1’s helical rate of $700 per pile, the piles alone would be 50 × $700 = $35,000. Source: A-1 Engineering, modified July 2026. A-1 says its numbers vary across the state and by project, and its example assumes the entire house needs to be lifted, so it is not a typical job.
Budget 3: a bowing 20-foot basement wall
Using Angi’s per-unit prices, with wall anchors about every 5 feet, a 20-foot wall needs 4 anchors: 4 × $400 = $1,600 to 4 × $700 = $2,800. Angi’s own total for straps on the same wall is $1,700 to $5,000.
| Line item | Wall anchors: low | Wall anchors: high | Straps: low | Straps: high |
|---|---|---|---|---|
| Stabilization (Angi, Oct 2026) | $1,600 | $2,800 | $1,700 | $5,000 |
| Engineer report (HomeAdvisor, June 2026) | $340 | $780 | $340 | $780 |
| Permit (This Old House, Oct 2026) | $75 | $150 | $75 | $150 |
| Total (our calculation) | $2,015 | $3,730 | $2,115 | $5,930 |
Olshan’s project totals for the same methods start at $5,500 to $6,000. The gap between per-unit pricing and contractor job totals is one more reason to ask how many anchors or straps a bid includes, and whether excavation, interior finishes and waterproofing are included.
How Location Changes the Price
Location changes the price mainly through soil and job scope, and only partly through wages. The clearest evidence: Texas construction laborers earn about 18% less than the national average ($20.63 vs $25.02 an hour, BLS), yet Angi’s October 2025 Austin average of $6,815 sits above the national $5,174 that HomeAdvisor reports.
Soil is a big part of the reason. Expansive clays “shrink and swell due to changes in moisture content,” and the Texas Department of Licensing and Regulation calls them “a very common cause of foundation problems”. The bulletin cites the residential code’s test for expansive soil, one criterion of which is a plasticity index of 15 or greater. In clay markets, settlement and heave repairs mean piers, and piers mean higher job totals. In basement markets, bowing walls and water push the mix toward anchors, straps and waterproofing. The planned guide to expansive clay soil explains the mechanism.
City figures are scarce and often old, and they don’t follow wage levels. LendEDU’s April 2026 ranges are $1,700 to $5,500 in New York, $3,500 to $14,000 in Denver and $3,300 to $6,800 in Houston, with no job type stated. New York has the highest wage index of the three, yet the lowest range.
Labor costs by state
Here is how much construction laborers earn in each state, compared with the national mean of $25.02 an hour. The index is the state’s mean hourly wage divided by the national mean, so 0.82 means about 18% below average.
| State | Mean hourly wage | Index (US = 1.00) | Group |
|---|---|---|---|
| Alabama | $18.23 | 0.73 | 10 lowest |
| Arkansas | $18.87 | 0.75 | 10 lowest |
| Mississippi | $19.38 | 0.77 | 10 lowest |
| New Mexico | $19.93 | 0.80 | 10 lowest |
| Georgia | $19.96 | 0.80 | 10 lowest |
| Louisiana | $20.31 | 0.81 | 10 lowest |
| Texas | $20.63 | 0.82 | 10 lowest |
| Oklahoma | $20.82 | 0.83 | 10 lowest |
| Virginia | $21.00 | 0.84 | 10 lowest |
| South Dakota | $21.30 | 0.85 | 10 lowest |
| Florida | $21.42 | 0.86 | Selected state |
| United States | $25.02 | 1.00 | National mean |
| Missouri | $29.26 | 1.17 | 10 highest |
| Washington | $29.48 | 1.18 | 10 highest |
| Rhode Island | $29.70 | 1.19 | 10 highest |
| New York | $29.89 | 1.19 | 10 highest |
| Minnesota | $31.12 | 1.24 | 10 highest |
| California | $31.19 | 1.25 | 10 highest |
| Illinois | $32.51 | 1.30 | 10 highest |
| New Jersey | $33.84 | 1.35 | 10 highest |
| Massachusetts | $34.05 | 1.36 | 10 highest |
| Hawaii | $34.39 | 1.37 | 10 highest |
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, SOC 47-2061 Construction Laborers, mean hourly wage, statewide. Ranked across the 50 states; the District of Columbia is 1.00. Index is our calculation.
Labor is only part of a price
A wage is not a price. Contractor prices also carry overhead, insurance, equipment, margin and warranty reserves. Steel piers, helical piles, concrete and foam are priced largely nationally. No published source we found gives the labor share of a typical foundation repair, so we don’t multiply national prices by this index. A statewide average also hides big metro differences: Houston, Dallas and rural Texas all get the same 0.82. Use the table to understand why quotes differ between states, not to adjust a quote.
State and city prices for Texas are planned in the foundation repair cost in Texas and Houston guides. The cost calculator shows your state’s labor index alongside its national planning range.
How to Compare Foundation Repair Quotes
Compare quotes line by line on the same scope, never by total. Two bids for “foundation repair” can propose different numbers of piers, different pier types, or different exclusions, and the lower total is often the smaller job.
Ask every bidder to put these in writing:
- The diagnosis: what moved, why, and what was measured to show it (a floor elevation survey, not just a visual look).
- Pier count, pier type and price per pier, with a plan showing each location, and the target depth or the installation pressure or torque the pier must reach.
- Who designed the repair: whether an engineer of record is involved, and whether that engineer visited the site.
- The lift target, and the conditions under which the crew will stop short. The Texas Section ASCE guidelines say “it is unlikely that elevation adjustments will result in a level foundation” (section 7.4.3.1), so a promise of “perfectly level” is a warning sign.
- Plumbing testing: before, after or both, and who pays to fix a leak the test finds.
- Permit and engineering: included, or billed separately.
- Exclusions: drywall, doors, flooring, tile, landscaping and hardscape, named in writing.
- A post-repair floor elevation survey, on the same grid as the first one.
- The warranty: what it covers (the piers, the lift, or both), whether it transfers to a buyer, and what voids it.
| Bid A | Bid B | What to ask | |
|---|---|---|---|
| Piers | 6 steel push piers | 10 steel push piers | Why do the designs differ? Ask both to explain the other's plan. |
| Engineer | Not included | Engineer letter included | Will an engineer review Bid A's design? |
| Plumbing test | Not mentioned | Before and after | Who pays if the after-test finds a leak? |
| Interior restoration | Excluded | Excluded | Budget it yourself in both cases. |
| Warranty | Lifetime, non-transferable | Lifetime, transferable | Transferability matters when you sell. |
If the bids disagree about the cause or the method, not just the price, an independent opinion is worth more than a fourth bid. The planned guide to hiring a structural engineer for foundation repair explains when to get one, and foundation repair red flags covers sales tactics to watch for. A planned guide to reading a foundation repair estimate will walk through a quote line by line.
Ready to compare itemized bids? Find vetted foundation repair contractors near you and ask each for the same scope.
Insurance and Financing: A Short Orientation
Insurance rarely pays for settlement repairs, and financing is usually arranged through the contractor or a lender. Both deserve a check before you sign.
Insurance. GEICO’s September 2026 guide says “most homeowners insurance policies exclude coverage for gradual settling or shifting of the foundation,” but coverage may apply when a sudden covered event, such as a burst pipe, fire or windstorm, causes the damage. Read your own policy’s exclusions and ask your insurer before work starts. The planned guide to whether insurance covers foundation repair goes into the details.
Financing. Many contractors offer payment plans, and personal loans and home equity products are the other common routes. Compare the total cost of borrowing, not the monthly payment, and don’t let a financing offer rush you past getting a second quote. A planned guide to foundation repair financing options will compare them.
Foundation repair cost questions
How much does foundation repair cost on average?
Angi's data, published by HomeAdvisor in June 2026, puts the typical job at $2,225 to $8,133, with an average of $5,174. That average blends inexpensive crack repairs with pier work. Olshan, a contractor whose jobs lean structural, reports a 2026 average of $11,950. For settlement repairs, budget by pier count instead: most slab jobs need 5 to 15 piers at roughly $1,000 to $3,000 each.
How much does a foundation pier cost?
HomeAdvisor and This Old House quote $1,000 to $3,000 per pier. The type matters. Olshan's June 2026 list puts drilled piers at $765 to $1,100, steel push piers at $990 to $1,350 and helical piers at $3,500 to $4,400 each. Ram Jack lists helical piers at $2,000 to $4,000 and steel pressed pilings at $1,500 to $3,000. Depth, access and interior locations also change the price.
How many piers does a typical foundation repair need?
Olshan says most slab jobs need 5 to 15 piers: about 4 to 6 for a small settled corner and 12 to 20 or more for widespread settlement along a full side. LendEDU says an average home needs 8 to 10 piers. Because the count multiplies the per-pier price, ask every bidder for the number of piers and a plan showing where each one goes.
What type of foundation repair is most expensive?
Lifting a whole house and replacing the foundation cost the most. This Old House lists lifting and leveling at $20,000 to $23,000, and Bob Vila's 2024 guide puts replacement at $20,000 to $100,000. Among routine repairs, long runs of helical piers cost the most: 12 to 20 piers at Olshan's $3,500 to $4,400 each works out to $42,000 to $88,000. Crack sealing is the cheapest category.
Does homeowners insurance cover foundation repair?
Usually not for settling. GEICO's September 2026 guide says most homeowners policies exclude gradual settling or shifting of the foundation, but coverage may apply when a sudden covered event, such as a burst pipe, fire or a fallen tree in a windstorm, causes the damage. Every policy differs, so read your exclusions and ask your insurer in writing before you sign a repair contract.
Do I need a structural engineer, and what does it cost?
For settlement, a bowing wall, or bids that disagree about the cause, an independent engineer is usually worth the fee. HomeAdvisor lists $340 to $780 for a foundation inspection report, and Angi's Houston data shows $400 to $1,000, rising to $1,100 or more for a fuller investigation. Texas Section ASCE guidelines say the engineer should personally visit the site and require a floor elevation survey after the repair.
Why do I need a plumbing test with foundation repair?
Lifting a slab can stress the water and drain lines under it, and a leak can be part of what caused the settlement. Texas Section ASCE guidelines say supply and drain lines should be tested for leaks if jacking or lifting is included. A Texas engineer's estimate lists a plumbing static test at $800, and a Houston plumber advertises hydrostatic testing starting at $1,650.
How long does foundation repair take?
Perma-Pier's April 2026 guide says most foundation repair projects take one day to one week, depending on complexity. Crack sealing is quick, while pier and leveling work takes longer. Engineering, permits, plumbing tests and cosmetic repairs add time before and after the crew is on site, so ask for the full schedule, including the post-repair elevation survey.
Sources
- HomeAdvisor — How Much Does Foundation Repair Cost? (updated June 20, 2026; Angi data)
- This Old House — Foundation Repair Cost (updated Oct 8, 2026; Angi data)
- LendEDU — Foundation Repair Cost (updated April 1, 2026)
- Bob Vila — How Much Does Foundation Repair Cost? (updated May 29, 2024)
- Thumbtack — Foundation Repair Cost (last updated July 1, 2026)
- Olshan Foundation Solutions — Foundation Repair Costs (modified June 3, 2026)
- Perma-Pier — Foundation Repair Cost (published April 14, 2026)
- Ram Jack — Cost of Foundation Repair (updated Aug 27, 2026)
- A-1 Engineering — Estimating the Cost of Foundation Repair (modified July 23, 2026)
- Nick's Plumbing — Hydrostatic Leak Detection, Houston (pricing updated June 5, 2026)
- Angi — Cost to Repair a Bowing Basement Wall (updated Oct 1, 2026)
- Angi — Structural Engineer Cost in Houston, TX (updated July 8, 2026)
- Angi — Foundation Repair Cost in Austin, TX (updated Oct 10, 2025)
- Angi — How Much Does Pier and Beam Foundation Repair Cost? (updated Sept 18, 2026)
- U.S. Bureau of Labor Statistics — OEWS May 2025, 47-2061 Construction Laborers (tables modified May 15, 2026)
- Texas Section ASCE — Guidelines for the Evaluation and Repair of Residential Foundations, Version 3 (adopted April 1, 2022)
- Texas Department of Licensing and Regulation — IHB Technical Bulletin 10-01, Expansive Soils (rev. Oct 16, 2018)
- GEICO — Does Homeowners Insurance Cover Foundation Issues? (Sept 18, 2026)