Cost guide
House Leveling Cost: Re-Shim, Slab Pier-and-Lift or Whole-House Lift
Leveling is three different jobs with three different price scales. Work out which one you're pricing, then add the engineer, permit and the repairs that follow a lift.

House leveling cost depends on which of three jobs you need. Published 2026 figures run from about $800–$3,500 to re-shim a pier-and-beam house (Olshan) to $3,000–$15,000 for most slab pier-and-lift jobs (Black Beard, Two Brothers) and $10,000–$40,000 to lift a whole house (Two Brothers). Engineering, permits and after-lift repairs come on top.
Which Kind of Leveling Are You Pricing?
“House leveling” covers three different jobs: adjusting an existing pier-and-beam floor, lifting a settled slab onto new piers, and lifting a whole house off its foundation. Mixing them up is why published figures look contradictory. HomeLight says leveling “generally ranges from $10,000 to $30,000” without naming a method, while Black Beard, a Dallas-Fort Worth contractor, says most homeowners in its area spend “between $3,500 and $8,500.” Both can be right for the jobs they’re describing.
| Job | Foundation | What you're paying for | Published range | More detail |
|---|---|---|---|---|
| Re-shim or adjust | Pier-and-beam | Jacking the framing from the crawl space and adding shims on existing piers | $800–$3,500 (Olshan); $1,000–$3,500 (Two Brothers); $1,200–$4,000 (Angi) | Pier and beam repair cost |
| Replace supports and re-level | Pier-and-beam | New or replaced piers plus leveling across a wider area | $6,600–$12,000 for multiple pier replacement; $9,000–$23,000 for full re-leveling (Olshan); $7,000–$15,000+ (Black Beard) | Pier and beam repair cost |
| Slabjacking or foam | Slab, smaller areas | Grout or polyurethane injected under the slab to raise it, without piers | Mudjacking $5,000–$10,800, foam $4,500–$11,500 (Olshan); mudjacking $3,000–$8,000, foam $5,000–$15,000 (Black Beard) | How leveling works |
| Pier-and-lift | Slab | Piers installed under the slab, then the house lifted onto them | 1–5 piers $3,000–$6,000; 6–12 piers $6,000–$12,000 (Black Beard); 3–8 piers $5,000–$15,000; 10+ piers $15,000–$30,000 (Two Brothers) | Slab foundation repair cost |
| Whole-house lift | Any, raised off the foundation | Lifting the structure for flood elevation, sill or foundation replacement | $10,000–$40,000; $20,000–$100,000 with full foundation replacement (Two Brothers); $15,000–$21,000 plus permits for sill-plate access (HomeAdvisor) | Get a structural engineer involved |
| Manufactured home re-level | Piers under a chassis | Re-adjusting piers and shims to the HUD tolerance | $450–$900 average (This Old House, Angi data) | See the mobile home section below |
These are published ranges from contractors and cost publishers, not quotes. Contractor figures in particular reflect their own markets (Black Beard works in Dallas-Fort Worth, Two Brothers in Houston). How each method is actually done is covered in the house leveling guide; this page sticks to price.
Slab Leveling Cost
Leveling a slab house usually means installing piers and lifting onto them, and the total is driven mainly by how many piers the engineer or contractor calls for. Olshan says “most slab jobs require 5–15 piers depending on the affected area.” Black Beard says a small repair “might only require 3 to 5 piers” and “a major project could easily demand 15 or more.”
Price per pier
Per-pier prices vary by pier type and by publisher. Two Brothers’ steel push pier figure is an installed price drawn from Today’s Homeowner, which may explain why it runs higher than Olshan’s.
| Pier type and source | Per pier | Range on a shared scale |
|---|---|---|
| Drilled pierSource: Olshan, June 2026 | $765–$1,100 | |
| Steel push pierSource: Olshan, June 2026 | $990–$1,350 | |
| Steel push pier, installedSource: Two Brothers, July 2026 | $1,500–$3,500 | |
| Helical pierSource: Two Brothers, July 2026 | $2,000–$4,000 | |
| Helical pierSource: Olshan, June 2026 | $3,500–$4,400 |
Sources: Olshan and Two Brothers. For the trade-offs between pier types, see push piers, helical piers and concrete piers; a dedicated cost per pier guide is planned.
Mudjacking and foam: lifting without piers
Slabjacking (grout) and polyurethane foam raise a slab by filling under it, and in Olshan’s figures they cost about the same as a small pier job, $5,000–$10,800 for mudjacking and $4,500–$11,500 for foam. Cost publishers quote far less for mudjacking a small sunken section: This Old House, using Angi data, lists $550–$1,300. None of these sources states the slab area being lifted, so ask how many square feet a quote covers. What slabjacking and foam don’t do is add deep support, so the question is whether the soil under the slab will keep moving. The polyjacking vs mudjacking comparison covers when each fits. For full or severe underpinning, Olshan’s figure is $15,000–$30,000+.
Pier-and-Beam Leveling Cost
Leveling a pier-and-beam house is often the cheapest version of the job when the existing piers are sound, because the crew works from the crawl space and adds shims rather than new foundations. Olshan lists $800–$3,500 for shimming existing piers, and Angi says reshimming “costs around $1,600 on average, with most jobs totaling between $1,200 and $2,000.”
The price jumps when supports have to be replaced: Olshan lists $6,600–$12,000 for multiple pier replacement and $9,000–$23,000 for full re-leveling with widespread settlement. Rotten beams, sills or joists add to that. The itemized breakdown (per support, beams, sills, crawl-space access) is in the pier and beam repair cost guide.
How a Per-Pier Quote Adds Up
A per-pier price is only the biggest line on the bill. The total is roughly: number of piers × price per pier, plus the engineer’s report, plus the permit, plus plumbing testing (often included), plus the repairs inside the house after the lift.
Worked example 1: slab house on 8 steel piers (hypothetical)
This is an illustrative budget for a slab house where the proposal calls for 8 steel push piers, using published figures. It is not a quote for any real house.
| Line item | Arithmetic | Low | High | Source |
|---|---|---|---|---|
| Steel push piers | 8 × $990 to 8 × $1,350 | $7,920 | $10,800 | Olshan, June 2026 |
| Structural engineer report | One residential report | $499 | $780 | Olshan, June 2026 |
| Permit | One permit | $75 | $150 | Two Brothers, July 2026 |
| Plumbing leak test | Often included in the repair price | $0 | Ask | HD Foundations |
| Drywall crack repair | 4 cracks × $60 to 4 × $330 | $240 | $1,320 | This Old House, June 2026 |
| Door planing | 2 doors × $55 to 2 × $250 | $110 | $500 | Angi, July 2026 |
| Total | Sum of the rows | $8,844 | $13,550 | Our calculation |
Run the same 8 piers at Two Brothers’ installed figure of $1,500–$3,500 each and the piers alone come to $12,000–$28,000. That gap, from one line, is why you should ask every bidder for the pier count and the per-pier price separately, not just the total.
Same 8 piers, two published prices
$7,920–$10,800
8 steel push piers at Olshan's per-pier range
Our calculation from Olshan, 8 × $990–$1,350
$12,000–$28,000
8 installed steel push piers at Two Brothers' range
Our calculation from Two Brothers, 8 × $1,500–$3,500
$8,844–$13,550
Hypothetical all-in budget from the table above
Our calculation from the line items above
Worked example 2: re-shim now, or re-level properly (hypothetical)
Re-shimming is cheap, but it doesn’t fix a support that keeps sinking. Using Olshan’s figures, one re-shim costs $800–$3,500. If the cause isn’t fixed and the house needs re-shimming three times, that’s 3 × $800 = $2,400 to 3 × $3,500 = $10,500, which overlaps the $9,000–$23,000 Olshan lists for a full re-level. The repeat count here is hypothetical; the point is that a re-shim quote should come with an explanation of why the floor dropped and why it won’t drop again.
For a planning range on your own house, use the foundation repair cost calculator, then get written quotes.
After-Lift Repairs: Drywall, Doors and Plumbing
Expect to pay for some repairs inside the house after any real lift, because moving the structure moves the finishes too. Black Beard’s guide says “it’s normal for things to shift a little inside,” with existing cracks widening and new hairline cracks appearing. Leveling quotes rarely price this work, so build it into your budget yourself.
| Item | Published cost | Who pays | Ask the contractor |
|---|---|---|---|
| Plumbing leak test | Most legitimate companies "include a hydrostatic plumbing test in the price"; the test takes about 20 minutes (HD Foundations). No reliable standalone price found. | Usually the contractor | Is it tested before and after? Who pays to fix a leak the test finds? |
| Drywall crack repair | About $60 for a small hairline crack to $330 or more for larger cracks; pros charge $60–$100 per hour (This Old House) | Usually the homeowner | Is any cosmetic repair included, or excluded in writing? |
| Door planing | Average $95, range $55–$250 per door (Angi) | Usually the homeowner | Will the crew adjust doors that bind after the lift? |
| Other door repair | Average $240, typical $132–$372; some pros charge a $50–$100 minimum service fee (HomeAdvisor) | Usually the homeowner | Can you wait until the house settles before rehanging? |
| Tile, trim, brick, flooring | Varies too widely for a published figure; get a separate quote | Usually the homeowner | Which finishes are most at risk on this lift? |
The plumbing test isn’t optional in the engineering guidance. The Texas Section ASCE guidelines (Version 3, section 7.6) say “water supply and sanitary drain lines should be tested for leaks if jacking or lifting is included in the remedial measures,” and that leaks found should be repaired. A drain leak under a slab is its own cost line; see the slab foundation repair cost guide.
Wait to patch and paint until the house has settled on its new supports. If you’re planning a kitchen or flooring remodel, level first and remodel after, so you don’t pay for new finishes twice. The normal-versus-worrying signs after a lift are in the house leveling guide.
Have a rough number? Get written quotes that list pier count, per-pier price and what's excluded.
What Drives House Leveling Cost
The biggest cost drivers are the type of job (re-shim, pier-and-lift or whole-house lift), the number and type of supports, and how much of the house has moved. After that come access, soil, engineering and permits, and the repairs that follow.
- Number of supports. Pier count is the multiplier on most slab bills. Olshan’s 5–15 pier range alone can triple the support cost.
- Pier type. In Olshan’s figures a helical pier costs roughly three times a steel push pier ($3,500–$4,400 against $990–$1,350).
- Condition of what’s already there. A pier-and-beam house with sound piers needs shims; one with rotten framing or failed footings needs replacement.
- Access. Low crawl spaces, interior piers under a slab, landscaping and hardscape at the perimeter all add labor.
- Engineering. Olshan lists $499–$780 for a residential structural engineer report.
- Permits. Two Brothers lists permits at $75–$150; fees vary by city.
- How much lift is attempted. More lift means more stress on finishes and plumbing, and more after-lift repair.
Know what that money buys. The Texas Section ASCE guidelines (section 7.4.3.1) say “it is unlikely that elevation adjustments will result in a level foundation,” and that lifting “should be governed by field judgment to limit damage to the foundation and finishes.” You’re paying for stable support and a better floor, not a perfectly flat one. The same guidelines (section 5.7) note that an owner “may choose to perform periodic cosmetic repairs and door adjustments, rather than comprehensive foundation underpinning,” which is a legitimate lower-cost choice when movement is minor and has stopped.
How to Compare House Leveling Quotes
Compare quotes line by line on the same scope, because two totals for “leveling” can describe different jobs. A cheap re-shim and an expensive pier-and-lift are not competing bids for the same work.
Ask each contractor to put these in writing:
- Which job it is: re-shim, support replacement, slabjacking or foam, pier-and-lift, or whole-house lift.
- Pier count, pier type and price per pier, plus a plan showing where each pier goes.
- The lift target and the conditions under which the crew will stop short of it.
- Engineering and permit: included, or separate, and who hires the engineer.
- Plumbing testing: before, after or both, and who pays for leak repair.
- Exclusions: drywall, doors, tile, brick, landscaping and flooring.
- Warranty: whether it covers the supports, the lift, or both, and whether it transfers to a buyer.
- Before-and-after floor elevations on the same grid, delivered when the job is done.
If quotes disagree on the cause or on the method, not just the price, an independent opinion from a structural engineer is worth paying for; Olshan lists $499–$780 for a residential report. See also foundation repair red flags.
Don't wait for quotes
If cracks are widening fast, a wall is bulging or leaning, doors suddenly won’t close, a beam is visibly sagging, or you smell gas, get help promptly. Call the gas utility for a gas smell, and get a structural engineer or experienced contractor out quickly for the rest.
Mobile and Manufactured Home Leveling Cost
Leveling a manufactured home is a different trade on a much smaller price scale. This Old House, using Angi data, puts it at $450–$900 on average, with single-wides typically $600 or less and triple-wides $1,000 or more. The target is set by HUD’s installation standard, 24 CFR 3285.6: no more than 1/4 inch difference between adjacent pier supports, with exterior doors and windows that don’t bind. See mobile home leveling for the details.
House leveling cost questions
How much does it cost to level a house?
It depends on which job you need. Olshan lists $800 to $3,500 to re-shim a pier-and-beam house, a Dallas-Fort Worth contractor lists $3,000 to $12,000 for slab leveling on 1 to 12 piers, and Two Brothers lists $10,000 to $40,000 to lift a whole house. HomeLight's $10,000 to $30,000 doesn't say which method it covers, so compare like for like.
Is it cheaper to level a pier and beam house or a slab?
Minor pier-and-beam leveling is usually cheaper because the crawl space allows re-shimming without new piers. Olshan lists $800 to $3,500 for shimming, against $5,000 to $10,800 for slabjacking or $990 to $1,350 per steel pier on a slab. A full pier-and-beam re-level, at $9,000 to $23,000 in Olshan's figures, can cost as much as a slab pier job.
How much does house leveling cost per pier?
Slab piers are priced per pier. Olshan lists $990 to $1,350 for steel push piers, $3,500 to $4,400 for helical piers and $765 to $1,100 for drilled piers, while Two Brothers lists $1,500 to $3,500 for an installed steel push pier. Olshan says most slab jobs need 5 to 15 piers, so multiply before you compare quotes.
Will leveling my house crack the drywall?
It can. Lifting moves the framing, and a Dallas-Fort Worth contractor's guide warns that existing cracks may widen and new hairline cracks may appear. Texas Section ASCE guidelines say lifting should be limited by field judgment to limit damage to finishes. Budget for touch-ups: This Old House puts drywall crack repair at about $60 for a hairline crack to $330 or more for larger ones.
Do I need a plumbing test after leveling?
Engineering guidance says yes. The Texas Section ASCE guidelines say water supply and drain lines should be tested for leaks if jacking or lifting is part of the repair, and leaks found should be repaired. Many contractors include a hydrostatic test in their price. Confirm in writing whether testing happens before, after or both, and who pays to fix any leak it finds.
How long does house leveling take?
Shimming a pier-and-beam house can take 1 to 2 days, and a standard slab repair with 10 to 15 piers takes a crew about 3 to 5 days on site, according to a Dallas-Fort Worth contractor's 2026 guide. Complicated jobs run a week or more. Engineering, permits and plumbing tests can add time before the crew arrives.
Will my house be perfectly level afterwards?
Rarely, and you shouldn't pay as if it will be. The Texas Section of the American Society of Civil Engineers says it is unlikely that elevation adjustments will result in a level foundation. Ask the contractor for before-and-after floor elevation readings and a written lift target, and check whether the warranty covers the lift or only the supports.
How much does it cost to level a mobile home?
Far less than a site-built house. This Old House, using Angi data updated June 2026, puts mobile home leveling at $450 to $900 on average: a single-wide typically $600 or less, a double-wide around $900, and a triple-wide $1,000 or more. Foundation repairs, if the home needs them, average around $4,500 in the same guide.
Sources
- Olshan Foundation Repair — Foundation Repair Costs (modified June 3, 2026)
- Two Brothers Foundation Repair — Foundation Repair Cost research page (July 5, 2026)
- Black Beard Foundation Repair — How Much Does House Leveling Cost? (modified June 3, 2026)
- This Old House — Foundation Repair Cost (updated Oct 8, 2026; Angi data)
- HomeLight — How Much Does It Cost to Level a House? (updated March 16, 2026)
- Angi — Pier and Beam Foundation Repair Cost (updated September 18, 2026)
- HomeAdvisor — Sill Plate Replacement Cost (updated June 19, 2026)
- Texas Section ASCE — Guidelines for the Evaluation and Repair of Residential Foundations, Version 3 (adopted April 1, 2022)
- HD Foundations — Plumbing Test for Foundation Repair (March 9, 2020)
- This Old House — Drywall Repair Cost (updated June 5, 2026)
- Angi — Cost to Plane a Door (updated July 8, 2026)
- HomeAdvisor — Door Repair Cost (updated June 17, 2026)
- This Old House — Mobile Home Leveling Cost (updated June 5, 2026; data via Angi)
- HUD Model Manufactured Home Installation Standards — 24 CFR 3285.6, via Cornell LII (current CFR)