Cost guide
Foundation Repair Cost Calculator
Pick your foundation type and the repairs on your quote. Every line uses a published, dated price, so you can check a bid item by item.

Choose your foundation type and the repairs you’re pricing, and the calculator adds up a low-to-high planning range from published 2026 prices, one line per repair with its source. It is not a quote or a diagnosis: the number of piers or repairs your house needs comes from an inspection, ideally with an engineer’s plan.
Estimate your repair
Get an engineer’s evaluation before you price the repair
Fast-changing movement or a bowing wall can be a safety issue, and the right repair depends on what an inspection finds. See which signs are urgent, then find local foundation repair contractors or an independent structural engineer.
Choose at least one repair in step 2 to see an estimate.
Planning range from published 2026 prices
to
Midpoint (our arithmetic, not a typical price)
| Item | Quantity | Range | Source |
|---|
Prices reviewed October 18, 2026. National published ranges, not a quote: your price depends on what an inspection finds, access, soil and local market. Compare it with written quotes line by line.
Compare local contractorsHow the calculator works
Each line is quantity × a published unit price range, and the total is the sum of the lines. Nothing is averaged or hidden:
- Every unit price is copied from a dated public source, listed in the table below. When two sources price the same thing differently, the line spans both (lowest low to highest high) and names both, so you can see the disagreement instead of a blended number.
- “I don’t know” uses a published band. For slab and basement piers, Olshan’s statement that “most slab jobs require 5–15 piers” sets the count: 5 piers at the low price to 15 at the high price. That is why the range jumps when you tick it.
- Whole-job items stay whole-job. Re-shimming, crack injection projects, full re-leveling and drainage are published as job totals, so they’re added once.
- The midpoint is arithmetic, half-way between low and high. It is not a “typical” price, because none of the sources publish one for the same scope.
The prices behind the estimate
These are all the unit prices the calculator uses. Where a contractor’s own price page is the source, it reflects that company’s market; publisher figures (Angi, HomeAdvisor, This Old House) are national.
| Item | Applies to | Published range | Source |
|---|---|---|---|
| Steel push piers | Slab, Basement | $990–$1,350 per pier | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $1,500–$3,000 per piersteel pressed pilings | Ram Jack, cost of foundation repair (Aug 2026) | ||
| Helical piers | Slab, Basement | $3,500–$4,400 per pier | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $2,000–$4,000 per pier | Ram Jack, cost of foundation repair (Aug 2026) | ||
| Drilled concrete piers | Slab | $765–$1,100 per pierlisted as “Drilled Pier” | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| Polyurethane foam slab lifting | Slab | $900–$7,500 per jobpolyurethane foam | Angi, foundation repair methods (July 2026) |
| $1,000–$3,000 per jobpolyurethane injection to lift slabs and fill voids, residential | Ram Jack, cost of foundation repair (Aug 2026) | ||
| $4,500–$11,500 per jobPolyLift foam, per house-foundation project | Olshan Foundation Solutions, foundation repair costs (June 2026) | ||
| Mudjacking (slabjacking) a sunken slab section | Slab | $550–$1,300 per jobslab/mudjacking | This Old House, foundation repair cost (Oct 2026) |
| $5,000–$10,800 per jobmudjacking, per house-foundation project (its quick cost guide also shows $1,900–$3,800) | Olshan Foundation Solutions, foundation repair costs (June 2026) | ||
| Crack injection (epoxy or polyurethane) | Slab, Basement | $750–$4,500 per jobwall crack injection (epoxy / urethane), per project | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $300–$800 per jobcrack repair job | Ram Jack, cost of foundation repair (Aug 2026) | ||
| Wall anchors | Basement | $400–$700 per anchoreach, typically one every 5 ft | Angi, cost to repair a bowing basement wall (Oct 2026) |
| Carbon fiber wall straps | Basement | $350–$1,000 per strapcarbon fiber strips, each | Angi, foundation repair methods (July 2026) |
| $350–$1,000 per strapcarbon fiber or steel straps, each | Angi, cost to repair a bowing basement wall (Oct 2026) | ||
| Re-shimming existing piers | Pier and beam | $800–$3,500 per jobshimming existing piers (minor leveling) | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $1,200–$4,000 per jobreshimming | Angi, pier and beam foundation repair cost (Sept 2026) | ||
| Adding new piers | Pier and beam | $1,100–$3,000 per piernew pier addition | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $800–$4,000 per pieradding new piers | Angi, pier and beam foundation repair cost (Sept 2026) | ||
| Replacing failed piers | Pier and beam | $1,100–$1,700 per piersingle pier replacement | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $2,000–$6,000 per pierreplacing piers | Angi, pier and beam foundation repair cost (Sept 2026) | ||
| Sistering floor joists | Pier and beam | $100–$300 per joist“$100 to $300 or more per joist” | HomeAdvisor, floor joist repair cost (June 2026) |
| Replacing beams | Pier and beam | $400–$1,200 per beambeam replacement, each | Angi, pier and beam foundation repair cost (Sept 2026) |
| Replacing sill plate | Pier and beam | $100–$120 per linear foot | HomeAdvisor, sill plate replacement cost (June 2026) |
| Full re-leveling (widespread settlement) | Pier and beam | $9,000–$23,000 per job | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| Structural engineer’s report | Slab, Pier and beam, Basement | $499–$780 per jobresidential engineer report | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $340–$780 per jobstructural engineer report | HomeAdvisor, foundation repair cost (June 2026) | ||
| Building permit | Slab, Pier and beam, Basement | $75–$150 per jobpermits | This Old House, foundation repair cost (Oct 2026) |
| Plumbing leak test (slab) | Slab | $800–$800 per jobplumbing static test, estimating rate | A-1 Engineering, estimating the cost of foundation repair (Texas) (July 2026) |
| $1,650–$1,650 per job“Starting at $1,650” | Nick’s Plumbing, hydrostatic leak detection (Houston) (June 2026) | ||
| Drainage correction or regrading | Slab, Pier and beam, Basement | $2,800–$8,000 per job | Olshan Foundation Solutions, foundation repair costs (June 2026) |
| $2,000–$5,500 per jobfoundation drainage | HomeAdvisor, foundation costs (June 2026) | ||
| Drywall crack repair after lifting | Slab, Pier and beam, Basement | $60–$330 per crack“as little as $60” for a small hairline crack; larger cracks “$330 or more” | This Old House, drywall repair cost (June 2026) |
| Planing sticking doors | Slab, Pier and beam, Basement | $55–$250 per door | Angi, cost to plane a door (July 2026) |
| Date | Change |
|---|---|
| 2026-10-18 | Added Olshan’s house-foundation prices for foam lifting ($4,500–$11,500) and mudjacking ($5,000–$10,800) beside the national figures, so the lines span both. |
| 2026-10-18 | Crack injection: replaced Ram Jack’s $1,000–$3,000 polyurethane figure (slab lifting and void filling) with its $300–$800 crack repair figure. |
| 2026-10-18 | Foam slab lifting: added Ram Jack’s $1,000–$3,000 polyurethane injection figure as a second source (the range is unchanged). Source notes reworded to match each source. |
| 2026-10-18 | Calculator launched with published 2026 ranges from the sources listed in the table. |
About these figures
What the calculator can’t know
How many piers or repairs you need
Pier count drives most of the price, and it’s set by how much of the foundation has moved, the soil, the house’s weight and the spacing the designer chooses. A published band is a placeholder. Replace it with the count on your quote, or better, the layout on an engineer’s plan.
Your location
We don’t scale the range for your state. No published source gives the labor share of a foundation repair, and materials like steel piers are priced nationally, so a location factor would be invented precision. What the calculator shows instead is real data: the Bureau of Labor Statistics May 2025 wage estimates for construction laborers, state against the US mean of $25.02 an hour. In Texas the mean is $20.63, about 18% below; in Massachusetts it is about 36% above. Use it as context when you read local quotes, not as an adjustment.
Soil, water and hidden conditions
Expansive clay, a plumbing leak under the slab, rotten sills or concealed rebar damage can all change the scope after work starts. The calculator flags these as reasons to get an engineer’s view rather than multiplying the price by a made-up factor. Even a well-designed repair has limits: the Texas Section ASCE guidelines state that “perfection is not attainable by remedial measures” (§7.1).
Not sure what's wrong yet? Price the repair after you know the cause.
Worked examples
These are hypothetical inputs run through the calculator, to show how the lines add up.
| Scenario | Inputs | How it adds up | Planning range |
|---|---|---|---|
| Slab, one settling side | 8 steel push piers + engineer report + permit + plumbing leak test | 8 × $990–$3,000 = $7,920–$24,000; engineer $340–$780; permit $75–$150; leak test $800–$1,650 | $9,135–$26,580 |
| Pier and beam, sagging floor | Re-shim (whole job) + 6 sistered joists + engineer report | Re-shim $800–$4,000; 6 × $100–$300 = $600–$1,800; engineer $340–$780 | $1,740–$6,580 |
| Basement, cracked and slightly bowed wall | Crack injection (project) + 5 carbon fiber straps + drainage correction | Injection $300–$4,500; 5 × $350–$1,000 = $1,750–$5,000; drainage $2,000–$8,000 | $4,050–$17,500 |
The slab example shows why sources matter: Olshan’s push pier price ($990–$1,350) and Ram Jack’s steel pressed piling price ($1,500–$3,000) barely overlap, so the line spans both. If your quote is $1,200 a pier, it sits inside Olshan’s range; at $2,800 it sits inside Ram Jack’s. Either way, the question to ask is what the pier type, depth criteria and warranty are, not which number is “right”.
Using your estimate with contractor quotes
Line up each written quote against the calculator’s lines rather than comparing totals:
- Per-unit price and count. “10 piers at $1,400” can be checked against the published range; a lump sum can’t.
- Pier type and installation criteria. Push, helical, pressed concrete and drilled piers are different products. Ask how depth or load is verified and for the installation log afterwards.
- What’s included. Engineering, permit, plumbing tests, concrete and landscaping restoration, and post-lift cosmetic repairs are often listed separately or excluded.
- Warranty terms. What it covers (often the piers, not new cracks), whether it transfers when you sell, and who backs it.
Have your numbers? Get more than one written scope from contractors who list this work.
For pricing detail by repair, see the slab foundation repair cost guide, the pier and beam repair cost guide, the crack repair cost guide and the house leveling cost guide.
Cost calculator questions
How accurate is a foundation repair cost calculator?
It gives a planning range, not a quote. Published unit prices differ widely: Olshan lists steel push piers at $990 to $1,350 each, while Ram Jack lists steel pressed pilings at $1,500 to $3,000 (both 2026). The biggest unknown is how many piers or repairs your house needs, which only an inspection or an engineer's plan can settle.
How many piers does a foundation repair need?
It depends on how much of the foundation has moved and how far apart the piers are set. Olshan says most slab jobs need 5 to 15 piers. If you don't know your count yet, tick "I don't know" and the calculator uses that band, which is why the range gets much wider. Replace it with the count from your quote.
Does the calculator adjust prices for my state?
No. No published source says what share of a foundation repair price is labor, so scaling the whole range by local wages would be a guess. Instead, choosing a state shows how construction laborer pay there compares with the US average, from Bureau of Labor Statistics May 2025 data, as context for your quotes.
Why do two foundation repair quotes differ so much?
Usually because the scopes differ: the pier type, how many piers and where, depth or load criteria, whether engineering, permits, plumbing tests and restoration are included, and access. Compare quotes line by line with per-unit prices. A bid that is cheaper only because it has fewer piers is not the same repair.
Should I get a structural engineer before I use the estimate?
For anything beyond minor, stable cracks, yes. Olshan lists a residential engineer report at $499 to $780 and HomeAdvisor at $340 to $780 (2026). The report gives you a repair scope and pier layout that make an estimate meaningful, and a neutral plan you can put out to more than one contractor.
Does the estimate include drywall, doors and plumbing after leveling?
Only if you add them in step 3. Lifting a house can crack finishes and stress pipes, and the Texas Section ASCE guidelines say supply and drain lines should be tested for leaks when jacking or lifting is included. Published figures run from $60 for a small drywall crack to $330 or more for larger ones, and $55 to $250 to plane a door.
Can it price pier and beam repairs?
Yes. Choose pier and beam, then pick re-shimming, new or replacement piers, sistered joists, beams, sill plate or a full re-level. Re-shimming is priced as a whole job ($800 to $3,500 at Olshan, $1,200 to $4,000 at Angi) because no major source publishes a per-pier shim price.
Sources
- Olshan Foundation Solutions — Foundation repair costs (modified June 3, 2026)
- Ram Jack — Cost of foundation repair (Aug 2026)
- Angi — Pier and beam foundation repair cost (updated Sept 18, 2026)
- Angi — Foundation repair methods (updated July 9, 2026)
- Angi — Cost to repair a bowing basement wall (updated Oct 1, 2026)
- This Old House — Foundation repair cost (updated Oct 8, 2026)
- HomeAdvisor — Foundation repair cost (updated June 20, 2026)
- U.S. Bureau of Labor Statistics — OEWS May 2025, Construction Laborers (47-2061)
- Texas Section ASCE — Guidelines for the Evaluation and Repair of Residential Foundations, Version 3 (2022)